VM-3000
Emergency Voice Evacuation System
Music Distribution? Paging? Emergency Evacuation?
No worries, they're all covered. The VM-3000 Emergency Voice Evacuation System delivers high-quality background music and paging announcements throughout the building and even outdoors, and it immediately turns into emergency voice evacuation mode when an emergency event happens. Key Features • Fully compliant with NFPA72 requirements and UL2572/864* listed. • 6 general and 4 emergency messages can be stored to playback by manual operations or remote controls. • Flexible system scale expansion up to 2,000W/70V and 60 output zones. • Emergency remote mic stations and general PA mic stations. • Backup power supply, speaker-line surveillance and other device failure detection and logs. *UL2572: Control and Communication Equipment (Audio Systems can be used for an Emergency Communication and/or Mass Notification System)
*UL864: Control Units and Accessories for Fire Alarm Systems (Fire Voice) |
Since the VM-3000 is listed to UL2572/864, it can be a future-proof Emergency Communication System to be approved by AHJs for Mass Notification and/or Fire Alarm integrations when required.
The intelligent impedance measurement algorithm achieves a speaker-line supervision with no interruption of any broadcasting so that the background music can be going on 24/7. Reliable and intelligible voice announcements are supported also by a wide lineup of UL and CSFM listed speakers from TOA. |
Related Products
![]() SP-11N
SP-11N SIP Paging Module can be mounted on a variety of TOA's mixer amplifiers to receive paging announcements directly from SIP Multimedia Stations or other SIP phones. 5 contact closure outputs are available for zone selections or other system integrations such as door release or pre-recorded message playback. >>> More Details |
![]() N-8000 Series
N-8000 IP Intercom System is a versatile network audio communication system offering a proprietary high quality audio transmission for 2-way and 1-way communications. It supports IP stations, 2-wire stations, shielded-pair wire stations and 4-wire stations, which is a suitable solution for retrofit projects requiring existing cables to be reused. >>> More Details |